There are no products in your shopping cart yet.
bridges and viaducts
On model railways railway lines cross valleys, rivers, streams roads and other railway lines.
With adding different heights to your layout you create more space for railways or landscape.
With adding different heights to your layout you create more space for railways or landscape.
Loading...
Model kit N: footbridge - Metcalfe - PN136
€ 14,45
An intricately designed covered footbridge for use with any type of railways station.
More kits can easily be added to extend the bridge over more tracks.
The optional base steps can be used to adjust the height allowing the bridge to stand on base board or platforms.
Size: 124 x 70 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Double track brick viaduct - Metcalfe - PN140
€ 15,75
A sturdy and versatile structure that can be constructed as double track or it can be narrowed down to single track (twice as long).
Length arched sections: double track: 272 mm, single track: 544mm.
Trackbed width: double track: 58 mm, single track: 25 mm.
Height to trackbed: 72mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Double track stone viaduct - Metcalfe - PN141
€ 15,75
A sturdy and versatile structure that can be constructed as double track or it can be narrowed down to single track (twice as long).
Length arched sections: double track: 272 mm, single track: 544mm.
Trackbed width: double track: 58 mm, single track: 25 mm.
Height to trackbed: 72mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: double track tunnel entrances - Metcalfe - PN142
€ 11,95
A pair of sturdy double track tunnel entrances complete with inner walls.
Tunnel entrance width: 64mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: single track tunnel entrances - Metcalfe - PN143
€ 10,75
A pair of sturdy single track tunnel entrances complete with inner walls.
Tunnel entrance width: 34mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: retaining wall - stone - Metcalfe - PN144
€ 13,95
A realistic and sturdy looking wall with recessed lower sections.
Overall size: 295 x 68mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: retaining wall - brick - Metcalfe - PN145
€ 13,95
A realistic and sturdy looking wall with recessed lower sections.
Overall size: 295 x 68mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Railway bridge - brick - Metcalfe - PN146
€ 17,45
Beautifully detailed bridge with the option to make top side single or double track.
Overall size: 223 x 75mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Railway bridge - stone - Metcalfe - PN147
€ 17,45
Beautifully detailed bridge with the option to make top side single or double track.
Overall size: 223 x 75mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: tapered retaining wall - brick - Metcalfe - PN148
€ 13,95
A pair of realistic and sturdy looking tapered retaining walls with recessed lower sections.
Overall size: 270 x 68mm (each).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: tapered retaining wall - stone - Metcalfe - PN149
€ 13,95
A pair of realistic and sturdy looking tapered retaining walls with recessed lower sections.
Overall size: 270 x 68mm (each).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit N: Castle Wall Bridge - Metcalfe - PN196
€ 9,75
An opening in the castle wall allows a road or railroad passing through the Castle grounds.
Area: 148 x 15 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 148 x 15 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits