There are no products in your shopping cart yet.
Metcalfe
A model railway without buildings is hard to imagine.
Mostly you would like to add a station or locomotive shed to your layout.
Also the inhabitants of your model world need houses and shops.
Mostly you would like to add a station or locomotive shed to your layout.
Also the inhabitants of your model world need houses and shops.
Loading...
Model Kit OO - Crofters cottage - Metcalfe - PO259
€ 11,95
A tiny cottage with optional barn conversion which would fit in any village. Perfect for a rural scene.
Kit includes two optional extensions to customize the main cottage.
Kits can be added to each other to form a row of cottages.
Size main building: 110 x 60 x 100 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Corner shop red brick - Metcalfe - PO263
€ 16,95
Superbly detailed, the shop comes with a variety of signs and interiors enabling the use of more kits without repetition.
The kit is designed to stand along side PO261 Terraced houses kit.
Area: 126 x 126.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Corner shop stone - Metcalfe - PO264
€ 16,95
Superbly detailed, the shop comes with a variety of signs and interiors enabling the use of more kits without repetition.
The kit is designed to stand along side PO262 Terraced houses kit.
Area: 126 x 126.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Town end cottage - Metcalfe - PO267
€ 17,95
A tipical mediaval cottage based on the village of Lacock, Wiltshire famed for its appearances in many TV shows and films..
Size building: 186 x 122 mm (L x W)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief bank and shop - Metcalfe - PO271
€ 16,25
A detailed high street bank with accompanying shop next door.
Each with a variety of signs and interiors for different uses and periods.
Ideal for backdrops where space is limited.
Bank: (width x depth): 172 x 36mm. Height: 167 mm.
Shop: (width x depth): 83 x 26 mm. Height: 161 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Out of Stock
Model kit OO/HO: Low relief terraced shop fronts - red brick - Metcalfe - PO272
€ 17,95
Two pairs of two shop fronts in red brick finish with lots of alternative window displays and signs.
Combine with PO276 to make stand alone shops with back yards.
To enhance your shop fronts add on the canopy kit PO572.
Ideal for backdrops where space is limited.
Area: (width x depth): 128 x 97mm. Height: 125 mm. (one block of two houses)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief terraced house backs - red brick - Metcalfe - PO276
€ 15,75
Two pairs of house backs complete with yards and outbuildings.
Combine with PO274 to make stand alone houses with front gardens.
Ideal for backdrops where space is limited.
Area: (width x depth): 128 x 97mm. Height: 125 mm. (one block of two houses)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief terraced house backs - stone - Metcalfe - PO277
€ 15,75
Two pairs of house backs complete with yards and outbuildings.
Combine with PO275 to make stand alone houses with front gardens.
Ideal for backdrops where space is limited.
Area: (width x depth): 128 x 97mm. Height: 125 mm. (one block of two houses)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief department store - Metcalfe - PO279
€ 19,25
A finely detailed shop with added laser cut detailing.
Can be easily extended with extra kits to form double ended building.
Could also be placed back to back to make a stand alone building.
Ideal for backdrops where space is limited.
Area: (width x depth): 180 x 36mm. Height: 182 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Service station - Metcalfe - PO281
€ 19,25
A small town or country garage building with showroom and service bays, petrol pumps and canopy.
Area: 171 x 146.
Canopy: 79 x 133 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Warehouse - Metcalfe - PO282
€ 18,75
A large industrial warehouse / factory building that can be constructed as either a low relief building or stand alone structure.
Area stand alone: 117 x 171.
Low relief (2x) 117 x 60 mm and bridge 112 x 20 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Small factory - Metcalfe - PO283
€ 18,75
A single storey factory unit with northlight roof windows and rail/road loading bay plus three storey workshop building.
Two buildings with a variety of uses, that can be either stood alone or grouped together.
Area single storey: 225 x 94 (incl. platform)
Three storey: 75 x 94mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits