There are no products in your shopping cart yet.
Metcalfe
A model railway without buildings is hard to imagine.
Mostly you would like to add a station or locomotive shed to your layout.
Also the inhabitants of your model world need houses and shops.
Mostly you would like to add a station or locomotive shed to your layout.
Also the inhabitants of your model world need houses and shops.
Loading...
Model kit OO/HO: Factory entrance and boiler house - Metcalfe - PO284
€ 18,75
The grand entrance and engine house. Just what every factory needs.
Combined with the other industrial building kits from Metcalfe one can create a complete industry.
Area entrance building: 180 x 65 mm
Boiler house: 125 x 70 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Modern Industrial Unit - Metcalfe - PO285
€ 16,25
A multi use, modern industrial building that offers a wide range of uses.
Can be built as a stand alone or combined with multiple kits to create large industrial parks.
A large selection of alternative signs are included with the kit.
Area: 141 x 121 mm.
Height: 77 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Ramshackle Workshop - Metcalfe - PO286
€ 17,95
Model kit OO: Ramshackle Workshop - Metcalfe - PO286
This little beauty is very much like the small workshops you will find all over the place, usually hidden away down back alleyways and side streets. But still a very important part of the workaday scene.
Area: 158 x 84 mm. Height: 138 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This little beauty is very much like the small workshops you will find all over the place, usually hidden away down back alleyways and side streets. But still a very important part of the workaday scene.
Area: 158 x 84 mm. Height: 138 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Old Factory - Metcalfe - PO287
€ 21,75
Model kit OO: Old Factory - Metcalfe - PO287
This beautiful Old Factory lends itself to many uses. Comes with a variety of signs.
Area: 223 x 117 x 152 mm.
or 373 x 73 x 152 mm (half relief)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This beautiful Old Factory lends itself to many uses. Comes with a variety of signs.
Area: 223 x 117 x 152 mm.
or 373 x 73 x 152 mm (half relief)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Brewery - Metcalfe - PO288
€ 22,80
Model kit OO: Brewery - Metcalfe - PO288
This Factory Building is suitable as a brewery. Fits alongside Old Factory (PO287) and Ramshackle Workshop (PO286).
Dimensions: 118 x 114 x 270 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This Factory Building is suitable as a brewery. Fits alongside Old Factory (PO287) and Ramshackle Workshop (PO286).
Dimensions: 118 x 114 x 270 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Firestation - Metcalfe - PO289
€ 23,45
A modern style fire station with a double fire engine garage, side office with an upstairs break room and a fire tower at the rear. A sturdy building that looks good from every angle. A great addition to any village or town model scene.
Area: (width x depth): 190 x 200mm. Height: 146 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO: Grimy Old Mill - Metcalfe - PO290
€ 29,95
Model kit OO: Grimy Old Mill - Metcalfe - PO290
This beautiful Old Factory lends itself to many uses.
Area: 227 x 100 mm.
or 454 x 50 mm (half relief)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
This beautiful Old Factory lends itself to many uses.
Area: 227 x 100 mm.
or 454 x 50 mm (half relief)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Castle Gatehouse - Metcalfe - PO291
€ 23,95
a beautiful gatehouse which are still seen today in historic towns and cities.
Size building: 177 x 97 (L x W)
Maximum height: 169 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Watch Tower - Metcalfe - PO292
€ 8,45
To use between curtain walls or as a a stand alone folly.
Size main building: 42 x 42 x 124 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Curtain walls - Metcalfe - PO293
€ 14,45
These wall sections are idea to build your castle or fortify your model town.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit OO - Castle Hall - Metcalfe - PO294
€ 23,45
The beating heart of a castle.
Size main building: 110 x 60 x 100 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Castle Stonework builders sheets - Metcalfe - PO295
€ 6,95
8 sheets of card printed Castle Stonework.
Ideal for custom building of extra bits to your castle or medieval town.
Pack contains:
4 sheets x .23mm thick
4 sheets x .50mm thick
2 sheets of castle paving .5mm thick
1 sheet of laser cut topping stones
Please note colours may slightly vary.
More Metcalfe products