There are no products in your shopping cart yet.
Metcalfe
Mostly you would like to add a station or locomotive shed to your layout.
Also the inhabitants of your model world need houses and shops.
Loading...
Model Kit OO: Castle Wall Bridge - Metcalfe - PO296
Area: 238 x 23 mm
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Terraced houses red brick - Metcalfe - PO300
New redesigned pair of beautiful houses complete with back yards and paving slabs in the front.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 160.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Terraced houses stone - Metcalfe - PO301
New redesigned pair of beautiful houses complete with back yards and paving slabs in the front.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 160.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Terraced houses red brick - Metcalfe - PO302
New redesigned 2 pair of beautiful low relief houses complete with paving slabs in the front.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 60.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Terraced houses stone - Metcalfe - PO303
New redesigned 2 pair of beautiful low relief houses complete with paving slabs in the front.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 60.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Terraced houses red brick - backs - Metcalfe - PO304
New redesigned 2 pair of beautiful low relief houses backs complete with back yards.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 106 (one pair).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Terraced houses stone - backs - Metcalfe - PO305
New redesigned 2 pair of beautiful low relief houses backs complete with back yards.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 106 (one pair).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Shop fronts - brick - Metcalfe - PO306
New redesigned 2 pair of beautiful low relief shop fronts.
They come as 2 blocks, 1 with 2 shop fronts, the 2nd with a large shop front and an office entrance.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 106 (one pair).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Low relief - Shop fronts - stone - Metcalfe - PO307
New redesigned 2 pair of beautiful low relief shop fronts.
They come as 2 blocks, 1 with 2 shop fronts, the 2nd with a large shop front and an office entrance.
A modular design that can be added to more kits easily to create whole rows of terraces.
Area: 122,5 x 106 (one pair).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: double track Engine shed - red brick - Metcalfe - PO313
A sturdy double track engine shed with lots of detailing.
With laser cut roof trusses that make the interior detailing more authentic, and can be clearly seen through the roof windows.
Includes a separate workshop building that can be attached to the shed at any position or used free standing.
With lots of details: relief window lintels and sills. Beautifully printed red and blue brick.
Area: 323 x 140 mm
Workshop: 100 x 65mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: Mainline station Booking Hall - Metcalfe - PO320
The centerpiece to your mainline station with grand entrance from street level through to platform.
Nicely detailed on the rail side with laser cut canopy, easily extended with the addition of wall backed canopy kit PO341.
Area: 281 x 160 mm.
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit OO/HO: parcels office - Metcalfe - PO321
A multi-use building which can form part of a larger station scene when stood along side Mainline Station PO320 Booking Hall and PO341 Wall backed Canopy or use as stand alone building.
Kit includes short length of platform and ramp building at rear giving street level access.
Area: (width x depth): 213 x 112mm.
Ramp building: 137 x 50 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits