There are no products in your shopping cart yet.
Metcalfe
A model railway without buildings is hard to imagine.
Mostly you would like to add a station or locomotive shed to your layout.
Also the inhabitants of your model world need houses and shops.
Mostly you would like to add a station or locomotive shed to your layout.
Also the inhabitants of your model world need houses and shops.
Loading...
Model kit N: Boiler house and factory entrance - Metcalfe - PN184
€ 16,95
The grand entrance and the power house. A vital part to any industrial project.
Includes engine house and mill chimney.
Factory entrance building: 137 x 50 x 157h mm.
Boiler house and engine room: 104 x 70 x 71h mm.
Mill chimney: 21 x 21 x 212 h mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Modern industrial unit - PN185
€ 10,95
A multi use, modern industrial building that offers a wide range of uses.
Kit includes a large selection of alternative signs.
Area: 78 x 68 mm
Height: 42 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Ramshackle Workshop - Metcalfe - PN186
€ 14,45
Model kit N: Ramshackle Workshop - Metcalfe - PN186
Area: 100 x 62 mm. Height: 65 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 100 x 62 mm. Height: 65 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Old Factory - Metcalfe - PN187
€ 16,95
Model kit N: Old Factory - Metcalfe - PN187
Area: 180 x 69 mm. Height: 90 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 180 x 69 mm. Height: 90 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Brewery - Metcalfe - PN188
€ 15,75
Model kit N: Brewery - Metcalfe - PN188
Area: 69 x 63 mm. Height: 165 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Area: 69 x 63 mm. Height: 165 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Firestation - Metcalfe - PN189
€ 14,95
A modern style fire station with a double fire engine garage, side office with an upstairs break room and a fire tower at the rear. A sturdy building that looks good from every angle. A great addition to any village or town model scene.
Area: (width x depth): 106 x 109mm. Height: 82 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: low relief timber framed shop fronts - Metcalfe - PN190
€ 10,95
2 Medieval shop fronts to fit between modern shops.
Kit contains two half shop fronts with a choice of 2 roof styles.
With laser cut parts.
Area wide shop: 55 x 25 mm.
High shop: 33 x 25 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit N - Castle Gatehouse - Metcalfe - PN191
€ 19,25
a beautiful gatehouse which are still seen today in historic towns and cities.
Size building: 119 x 65 (L x W)
Maximum height: 107 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit N - Watch Tower - Metcalfe - PN192
€ 8,45
To use between curtain walls or as a a stand alone folly.
Size: 26 x 26 x 78 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit N - Curtain walls - Metcalfe - PN193
€ 10,95
These wall sections are idea to build your castle or fortify your model town.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model Kit N - Castle Hall - Metcalfe - PN194
€ 17,95
The beating heart of a castle.
Size main building: 118 x 71 x 140 mm (L x W x H)
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Castle Stonework builders sheets - Metcalfe - PN195
€ 6,95
8 sheets of card printed Castle Stonework.
Ideal for custom building of extra bits to your castle or medieval town.
Pack contains:
4 sheets x .23mm thick
4 sheets x .50mm thick
2 sheets of castle paving .5mm thick
1 sheet of laser cut topping stones
Please note colours may slightly vary.
More Metcalfe products