DCC concepts

A pack of six curved medium high (6.25mm post) brass point rodding cranks plus fixing pins etc.


Manual

More DCCconcepts products

Solid Brass Power Distribution Bars (2 Pack) - DCC concepts


More DCCconcepts products

AD-2fx is a 2-output DCC accessory decoder for Cobalt type motors and similar devices.

It tolerates a very wide track bus voltage range and offers exceptionally low current draw while static. It is designed to connect straight to track power or your accessory power bus.

The accessory decoder is easy to install, set up and connect to your layout systems.
It can also control multiple point motors on each of its 2 outputs.

Because it has low power needs there is no real need for added boosters just for point motors.

Having directly controlled panel lights for signals plus feedback makes it something special and when it is connected to Cobalt Classic Ω or Cobalt iP Analog, the combination adds two more changeover switches, making it possible to control almost anything you can think of with nothing extra to buy or install.

Manual (pdf)



More DCC concepts products

4x 2-wire LMS/BR Ground Signal – A pack of 4 x 3-lamp plug and play signals in 4mm scale (OO), supplied with NO control board.

The DCD-GS-BR.4 is the classic 3-lamp ground signal. It was first introduced in the mid 1930’s and spread far and wide. Most are still in use today. This makes it a great choice for layouts of many prototypes and periods.

Use as add-on for Alpha Mimic control signal systems OR use independently if you wish. Please note: If used with other power sources, resistors MUST be added – a selection of these are INCLUDED with this 4-pack


More DCCconcepts products

4x 2-wire LMS/BR Ground Signal – A pack of 4 x 4-lamp plug and play signals in 4mm scale (OO), supplied with NO control board.

The DCD-GS-MG.4 is the modern 4-lamp ground signal as introduced in the UK in 2000.

Use as add-on for Alpha Mimic control signal systems OR use independently if you wish. Please note: If used with other power sources, resistors MUST be added – a selection of these are INCLUDED with this 4-pack


More DCCconcepts products

4x 2-wire Red/Green Ground Signal – A pack of 4 x 2-lamp plug and play signals in 4mm scale (OO), supplied with NO control board.

The DCD-MS-RG.4 is a simple design 2-lamp ground signal that was first seen on a limited basis in the 1920’s in the UK, but it was very widely used internationally.

Use as add-on for Alpha Mimic control signal systems OR use independently if you wish. Please note: If used with other power sources, resistors MUST be added – a selection of these are INCLUDED with this 4-pack


More DCCconcepts products

8 pin to JST harness - NEM652 to Zen218 - DCC concepts

3 pack.


More DCCconcepts products

6 pin to 8 pin harness - NEM651 to NEM652 - DCC concepts

3 pack.


More DCCconcepts products

Cobalt α Alpha Power is a well regulated filtered 5 AMP DC power supply which can deliver a super smooth 18v DC at the input terminals of your DCC system, Cobalt α Alpha Central or similar digital device.

It really does not matter which brand of DCC you use – while DCC concepts has “design matched” Cobalt α Alpha Power to their Cobalt α Alpha range, it has also been tested with all of the main DCC systems from “Starter Sets” to full-feature 5 amp systems, and it consistently gives great results with most brands. The only exception is Digitrax Zephyr which requires a lower voltage.

Manual (pdf)

Zen High Power stay alive - DCC concepts
Zen ZNSSA SUPER high power stay alive has exceptional power storage.
Once charged they have enough power to run an average OO or HO Locomotive more than two metres with the track power removed!

Dimensions: 32,3 x 16,1 x 5,3 mm (l x w x h).

Zen Black decoders are easy to use and have improved automatic braking and shuttle abilities. Also ONE step, simple to use, locomotive set-up and brown-out protection.

Features:

• 5 Amps peak power


• 3 A continuous power


• On-board high-power stay-alive


• 6 functions at 250mA each


• 42mm x 27mm x 13mm


• 12 screw terminals


• One-Step Loco Setup


• Shuttle mode (requires included ABC board for this to function)

Zen Black decoders are easy to use and have improved automatic braking and shuttle abilities. Also ONE step, simple to use, locomotive set-up and brown-out protection.

Features:

• 1.1 Amps peak power


• 750mA continuous power


• 6 functions at 100mA each


• 22mm x 16mm


• 21 direct, 8-pin & harness


• One-Step Loco Setup


• Shuttle mode (requires ABC boards for this to function)