There are no products in your shopping cart yet.
station buildings
A station building mostly has a size fitting the type of services that are given at the station. It can range from a simple single-storey building with limited services to a large building with many spaces. Most stations have ticket offices and waiting rooms for passengers.
Loading...
Model kit N: red brick platform - Metcalfe - PN110
€ 14,45
A versatile platform kit that can be built to virtually any shape.
You can build straight, curved, Island or Bay platforms.
The kit comes with four sheets of tarmac for the top.
The kit will make up to 8 feet of platform at a width of around 2 inches.
Or you can build an island platform 5ft long x 3 inches wide.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Signal Box set- Metcalfe - PN133
€ 11,95
This kit contains a large box suitable for mainline working and a small box ideal for crossings or goods yards. The pack also contains a lamp hut and a platelayers hut.
Large box: 100 x 26 mm (including steps).
Small box: 39 x 24mm.
Platelayers hut: 36 x 17mm.
Lamp hut: 19 x 13mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: stone platform - Metcalfe - PN135
€ 14,45
A versatile platform kit that can be built to virtually any shape.
You can build straight, curved, Island or Bay platforms.
The kit comes with four sheets of tarmac for the top.
The kit will make up to 7 feet of platform at a width of around 2 inches.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: footbridge - Metcalfe - PN136
€ 14,45
An intricately designed covered footbridge for use with any type of railways station.
More kits can easily be added to extend the bridge over more tracks.
The optional base steps can be used to adjust the height allowing the bridge to stand on base board or platforms.
Size: 124 x 70 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Country station- Metcalfe - PN137
€ 17,95
A finely detailed set of station buildings based on designs used by many railway companies.
Kit includes platform shelter and steps for use with platform kit PN110.
Fine detailing with die cut and laser cut components.
Station: 176 x 55 mm.
Platform shelter: 110 x 40mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Mainline station booking hall - Metcalfe - PN920
€ 26,45
A grand entrance to a large and beautifully detailed railway station.
Includes laser cut mullioned windows and platform canopy.
Designed to be used with the other Metcalfe mainline station add-on kits.
Area: 157 x 85 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Parcels office - Metcalfe - PN921
€ 20,45
A detailed parcels office designed to be used with the other Metcalfe mainline station kits.
Area: 120 x 89 mm (both buildings together).
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Island platform building - Metcalfe - PN922
€ 19,25
A centre platform waiting room with surrounding canopy.
Area: 163 x 51 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Modern Platform Shelter - Metcalfe - PN923
€ 10,25
Model kit N: Modern Platform Shelter - Metcalfe - PN923.
A modern style platform shelter that would look great on any layout. Comes with option of red brick or stone.
Area: 91 x 35 mm. Height: 35 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
A modern style platform shelter that would look great on any layout. Comes with option of red brick or stone.
Area: 91 x 35 mm. Height: 35 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Settle and Carlisle Railway station - Metcalfe - PN933
€ 19,25
A beautifully detailed replica of the smaller style stations found on the Settle & Carlisle Railway.
Area: 163 x 51 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Settle and Carlisle Railway station shelter - Metcalfe - PN934
€ 10,25
A platform shelter as can be found on the Settle & Carlisle Railway.
Area: 163 x 51 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits
Model kit N: Settle and Carlisle Railway station masters house - Metcalfe - PN935
€ 14,45
A classic period railway house. Designed to stand along side the other Settle & Carlisle Railway buildings. With laser cut components.
Area: 77 x 75 mm.
To build the kit you need following:
- a modellers knife
- a pair of scissors
- a steel ruler
- glue (for example: UHU solvent free all purpose)
- a cutting surface
- fine point tweezers
- water colour paints and a fine brush
Metcalfe kits are printed in full colour on to 1mm thick card.
Ready cut and creased.
Fully illustrated step by step instructions.
More Metcalfe kits